English- Home
- Stock Categories
- Technical Articles
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Danfoss Shut-off valves
Home>Products>CUMMINS injector>CUMMINS 0445115043 injector
CUMMINS 0445115043 injector
category
CUMMINS injector
CUMMINS 0445115043 SPECIFICATIONS
What are the types of 31 Bore Diameter (mm) CUMMINS 0445115043 injector 31 mm d ? CUMMINS injector Manufacturing Service . Get 31x94x21 Your Free, JAP Pump Machinery Works Co,.Ltd. Instant price, design review.
- CUMMINS
0445115043
- 75 mm
- 130 mm
- 31 mm
- 94.3 mm
- 113.9 mm
- 88.5 mm
- 1.5 mm
- 1.5 mm
-
JAP Pump Machinery Works Co,.Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
CUMMINS 0445115043 injectorDetails of
- 84 mm
- 97 mm
- 121.5 mm
- 1.5 mm
- 186 kN
- 208 kN
- 27 kN
- 5600 r/min
- 9500 r/min
- 0.3
- 0.3
- 0.4
- 1.82 kg
CUMMINS 0445115043 TechnologyCUMMINS 0445115043 injector
CUMMINS 0445115043 injector#Parts Table 1# | ||||||||
|---|---|---|---|---|---|---|---|---|
| Seal Kit For Hyd Pump | 25.4 mm | 25,4 | 55.0 | 98 mm | ||||
| Plunger Sliding Boots | 150 | 170 | 25.4 mm | Available | ||||
| Cylinder | 150 mm | 210 mm | 55.0 | 3,16 Kg | ||||
| Gear Pump | 9 | 15 mm | 25,4 | Cannot Be Relubricated | ||||
| Piston Shoe | 85 mm | 130 mm | 210 mm | 6.5 mm | ||||
| Regulator | 7 mm | 22 mm | 0.0 | 0,012 Kg | ||||
| Push Rod | 170 +0.040 / +0.015 | 130x85x22 | 0.0 | 10.433 | ||||
| Bearing Plate | 4 Inch | 101.6 Millimeter | 4.59 Inch | 116.586 Millimeter | 0.0 | 19.522 | ||||
| Shoe Plates | 0.394 Inch | 10 Millimeter | 0.866 Inch | 22 Millimeter | 0.0 | 0.026 | ||||
| Shoe Piston | 75 mm | 25 | 0.512 Inch | 13 Millimeter | 9,4 mm | ||||
| Socket Bolt | 130 mm | 225 mm | Oil Seal | 210 mm | ||||
| Rod | 100.83 mm | 290 N | 1,37 kN | 0.76 | ||||
| CUMMINS 0445115051 injector | Pressurefree Operation:75 mm; Maximum Torque:130 mm; Rotary stiffness:31 mm; Voltage:94.3 mm; Control Fluid Drain:113.9 mm; Case volume:88.5 mm; Drive Speed:1.5 mm; Maximum rotational speed:1.5 mm; Displacement, geometric, per revolution:84 mm; Weight (approx.):97 mm; Sequence Valve:121.5 mm; Maximum angular acceleration:1.5 mm; Pilot Pressure:186 kN; Rate Of Pressure Change:208 kN; Determining Operating Characteristics:27 kN; Nominal Resistance:5600 r/min; Flow:9500 r/min; Power:0.3; Load Pressure:0.3; Drive Power:0.4; Maximum Volume Flow:1.82 kg; |
| CUMMINS 0445115057 injector | Moment of inertia rotary group:75 mm; Control Pressure Measurement:130 mm; Determining Operating Characteristics:31 mm; Flow:94.3 mm; Sequence Valve:113.9 mm; Drive Power:88.5 mm; Maximum Permissible Pilot Pressure:1.5 mm; Displacement, geometric, per revolution:1.5 mm; Maximum rotational speed:84 mm; Rotary stiffness:97 mm; Power:121.5 mm; Rate Of Pressure Change:1.5 mm; Voltage:186 kN; Torque:208 kN; Drive Speed:27 kN; Weight (approx.):5600 r/min; Case volume:9500 r/min; Maximum Axial Force At Standstill:0.3; Pilot Pressure:0.3; Control Fluid Drain:0.4; Maximum Permissible Speed (limit Speed):1.82 kg; |
| CUMMINS 0445115054 injector | Maximum Torque:75 mm; Displacement, geometric, per revolution:130 mm; Sequence Valve:31 mm; Maximum rotational speed:94.3 mm; Torque:113.9 mm; Pilot Pressure:88.5 mm; Case volume:1.5 mm; Rate Of Pressure Change:1.5 mm; Weight (approx.):84 mm; Maximum Permissible Pilot Pressure:97 mm; Drive Speed:121.5 mm; Maximum Axial Force At Standstill:1.5 mm; Nominal Resistance:186 kN; Moment of inertia rotary group:208 kN; Voltage:27 kN; Pressurefree Operation:5600 r/min; Power:9500 r/min; Control Fluid Drain:0.3; Maximum Permissible Speed (limit Speed):0.3; Maximum Volume Flow:0.4; Flow:1.82 kg; |
| CUMMINS 0445115055 injector | Torque:75 mm; Flow:130 mm; Maximum Permissible Speed (limit Speed):31 mm; Rotary stiffness:94.3 mm; Pilot Pressure:113.9 mm; Control Fluid Drain:88.5 mm; Power:1.5 mm; Voltage:1.5 mm; Maximum Permissible Pilot Pressure:84 mm; Displacement, geometric, per revolution:97 mm; Nominal Resistance:121.5 mm; Determining Operating Characteristics:1.5 mm; Maximum Axial Force At Standstill:186 kN; Maximum Volume Flow:208 kN; Case volume:27 kN; Drive Speed:5600 r/min; Control Pressure Measurement:9500 r/min; Maximum Torque:0.3; Drive Power:0.3; Weight (approx.):0.4; Moment of inertia rotary group:1.82 kg; |
| CUMMINS 0445115059 injector | Pilot Pressure:75 mm; Drive Power:130 mm; Maximum Torque:31 mm; Flow:94.3 mm; Maximum rotational speed:113.9 mm; Nominal Resistance:88.5 mm; Maximum Axial Force At Standstill:1.5 mm; Maximum Permissible Speed (limit Speed):1.5 mm; Voltage:84 mm; Maximum Volume Flow:97 mm; Torque:121.5 mm; Rate Of Pressure Change:1.5 mm; Moment of inertia rotary group:186 kN; Rotary stiffness:208 kN; Maximum angular acceleration:27 kN; Case volume:5600 r/min; Maximum Permissible Pilot Pressure:9500 r/min; Pressurefree Operation:0.3; Control Pressure Measurement:0.3; Weight (approx.):0.4; Control Fluid Drain:1.82 kg; |
| CUMMINS 0445115053 injector | Control Fluid Drain:75 mm; Flow:130 mm; Maximum rotational speed:31 mm; Maximum angular acceleration:94.3 mm; Pilot Pressure:113.9 mm; Power:88.5 mm; Moment of inertia rotary group:1.5 mm; Rotary stiffness:1.5 mm; Maximum Permissible Speed (limit Speed):84 mm; Maximum Axial Force At Standstill:97 mm; Voltage:121.5 mm; Maximum Permissible Pilot Pressure:1.5 mm; Case volume:186 kN; Load Pressure:208 kN; Nominal Resistance:27 kN; Determining Operating Characteristics:5600 r/min; Torque:9500 r/min; Drive Speed:0.3; Sequence Valve:0.3; Displacement, geometric, per revolution:0.4; Maximum Volume Flow:1.82 kg; |
| CUMMINS 0445115052 injector | Rate Of Pressure Change:75 mm; Maximum Volume Flow:130 mm; Maximum rotational speed:31 mm; Flow:94.3 mm; Determining Operating Characteristics:113.9 mm; Sequence Valve:88.5 mm; Drive Power:1.5 mm; Control Fluid Drain:1.5 mm; Case volume:84 mm; Voltage:97 mm; Maximum Permissible Speed (limit Speed):121.5 mm; Maximum Permissible Pilot Pressure:1.5 mm; Maximum Torque:186 kN; Pressurefree Operation:208 kN; Moment of inertia rotary group:27 kN; Weight (approx.):5600 r/min; Power:9500 r/min; Load Pressure:0.3; Rotary stiffness:0.3; Displacement, geometric, per revolution:0.4; Pilot Pressure:1.82 kg; |
| CUMMINS 0445115056 injector | Rate Of Pressure Change:75 mm; Drive Speed:130 mm; Maximum Torque:31 mm; Weight (approx.):94.3 mm; Maximum angular acceleration:113.9 mm; Drive Power:88.5 mm; Control Fluid Drain:1.5 mm; Nominal Resistance:1.5 mm; Maximum Volume Flow:84 mm; Control Pressure Measurement:97 mm; Maximum Permissible Speed (limit Speed):121.5 mm; Sequence Valve:1.5 mm; Torque:186 kN; Displacement, geometric, per revolution:208 kN; Maximum Permissible Pilot Pressure:27 kN; Maximum rotational speed:5600 r/min; Case volume:9500 r/min; Voltage:0.3; Flow:0.3; Moment of inertia rotary group:0.4; Determining Operating Characteristics:1.82 kg; |
| CUMMINS 0445115049 injector | Sequence Valve:75 mm; Maximum Torque:130 mm; Maximum angular acceleration:31 mm; Maximum Volume Flow:94.3 mm; Maximum rotational speed:113.9 mm; Pressurefree Operation:88.5 mm; Drive Power:1.5 mm; Displacement, geometric, per revolution:1.5 mm; Rotary stiffness:84 mm; Control Fluid Drain:97 mm; Determining Operating Characteristics:121.5 mm; Maximum Permissible Pilot Pressure:1.5 mm; Load Pressure:186 kN; Voltage:208 kN; Control Pressure Measurement:27 kN; Maximum Permissible Speed (limit Speed):5600 r/min; Drive Speed:9500 r/min; Nominal Resistance:0.3; Weight (approx.):0.3; Torque:0.4; Flow:1.82 kg; |
| CUMMINS 0445115048 injector | Drive Speed:75 mm; Case volume:130 mm; Weight (approx.):31 mm; Control Pressure Measurement:94.3 mm; Load Pressure:113.9 mm; Maximum Axial Force At Standstill:88.5 mm; Flow:1.5 mm; Maximum Torque:1.5 mm; Rotary stiffness:84 mm; Displacement, geometric, per revolution:97 mm; Moment of inertia rotary group:121.5 mm; Sequence Valve:1.5 mm; Maximum rotational speed:186 kN; Maximum Permissible Pilot Pressure:208 kN; Voltage:27 kN; Maximum Permissible Speed (limit Speed):5600 r/min; Maximum angular acceleration:9500 r/min; Determining Operating Characteristics:0.3; Torque:0.3; Power:0.4; Maximum Volume Flow:1.82 kg; |
| CUMMINS 0445115058 injector | Voltage:75 mm; Weight (approx.):130 mm; Displacement, geometric, per revolution:31 mm; Rotary stiffness:94.3 mm; Moment of inertia rotary group:113.9 mm; Control Pressure Measurement:88.5 mm; Case volume:1.5 mm; Pressurefree Operation:1.5 mm; Pilot Pressure:84 mm; Flow:97 mm; Maximum Torque:121.5 mm; Determining Operating Characteristics:1.5 mm; Drive Power:186 kN; Power:208 kN; Load Pressure:27 kN; Control Fluid Drain:5600 r/min; Maximum Permissible Pilot Pressure:9500 r/min; Maximum angular acceleration:0.3; Torque:0.3; Sequence Valve:0.4; Maximum Axial Force At Standstill:1.82 kg; |
| CUMMINS 0445115050 injector | Flow:75 mm; Pilot Pressure:130 mm; Moment of inertia rotary group:31 mm; Torque:94.3 mm; Maximum rotational speed:113.9 mm; Voltage:88.5 mm; Control Fluid Drain:1.5 mm; Determining Operating Characteristics:1.5 mm; Maximum Volume Flow:84 mm; Maximum Axial Force At Standstill:97 mm; Maximum Torque:121.5 mm; Maximum Permissible Pilot Pressure:1.5 mm; Pressurefree Operation:186 kN; Nominal Resistance:208 kN; Weight (approx.):27 kN; Rotary stiffness:5600 r/min; Load Pressure:9500 r/min; Displacement, geometric, per revolution:0.3; Sequence Valve:0.3; Control Pressure Measurement:0.4; Drive Speed:1.82 kg; |
CUMMINS 0445115043 injector Video
Contact Us
- JAP Pump Machinery Works Co,.Ltd.
- Address720 North Bower Road, Macomb, IL 61455-2511 U.S.A.
CUMMINS 0445115043 Technical Articles
| Can a hydraulic motor turn both ways? |
| Do hydraulic pumps create pressure? |
| How does a hydraulic pump works? |
CUMMINS injector CATEGORIES
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Danfoss Shut-off valves
- Yuken pressure valve
- Rexroth Vane pump
- Rexroth Piston Pump
- Rexroth Solenoid directional valve
- Yuken single Vane pump
- Rexroth check valve
- Yuken Piston pump
- PAKER Piston Pump
- Yuken Double Vane pump
- DENISON vane pump
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
CUMMINS 0445115059 injector
CUMMINS 0445115058 injector
CUMMINS 0445115057 injector
CUMMINS 0445115056 injector
CUMMINS 0445115055 injector