English- Home
- Stock Categories
- Technical Articles
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Danfoss Shut-off valves
Home>Products>CUMMINS injector>CUMMINS 0445115027 injector
CUMMINS 0445115027 MODELS
Need a CAD or 3D Model?
CUMMINS 0445115027 injector
category
CUMMINS injector
CUMMINS 0445115027 SPECIFICATIONS
Welcome to the CUMMINS 0445115027 injector 15x35x11 online JAP Pump Machinery Works Co,.Ltd. seller.
- CUMMINS
0445115027
- 75 mm
- 6750 kgf
- 130 mm
- 4900 kgf
- 30 mm
- AISI 52100 Steel
- 77.8 mm
- Contact with Slinger
-
JAP Pump Machinery Works Co,.Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
CUMMINS 0445115027 injectorDetails of
- Round
- UC200C4HR23
- Set Screw Collar
CUMMINS 0445115027 TechnologyCUMMINS 0445115027 injector
CUMMINS 0445115027 injector#Parts Table 1# | ||||||||
|---|---|---|---|---|---|---|---|---|
| Seal Kit For Hyd Pump | 95 mm | 170 mm | 22,2 mm | 3,6 mm | ||||
| Press Pin | Ball Bearing | 170 | 0.0 | N/A | ||||
| Block Cylinder | ABEC 7 | ISO P4 | Push Type | 0.0 | N/A | ||||
| Friction Plate | In Stock | 8.465 Inch | 215 Millimeter | 0.0 | N/A | ||||
| Coil Spring | 4.724 Inch | 120 Millimeter | 8.465 Inch | 215 Millimeter | 0.0 | N/A | ||||
| Inclined Plate | ASTM-A-681, SAE J-437 | 64 | 4.724 Inch | 120 Millimeter | 45.0 | ||||
| Piston Shoe | 1.4375 in | 4-31/32 in | 94869 lbf | 28 mm | ||||
| Cylinder | Light | 110mm | 22,2 mm | 4.724 Inch | 120 Millimeter | ||||
| Rod | Felt Seal | 46,038 mm | 3.0 in | 1/2 in | ||||
| Ball Guides | 110mm | 160mm | 2.40 KGS | 0.9 in | ||||
| Pressure Plate | 304 Stainless Steel | 2516.59 | 013992028501 | 51222-skf | ||||
| Swash Plate | 22 mm | 28 mm | 30,302 | 7.7 in | ||||
| The Ball Hinge Spring | 46,038 mm | In Stock | Round | 95x170x64 | ||||
| Seal Kits | 1570 rpm | 5.448 | 8 Days | 1.0 in | ||||
| CUMMINS 0445115053 injector | Rate Of Pressure Change:75 mm; Displacement, geometric, per revolution:6750 kgf; Maximum Torque:130 mm; Sequence Valve:4900 kgf; Rotary stiffness:30 mm; Drive Speed:AISI 52100 Steel; Nominal Resistance:77.8 mm; Torque:Contact with Slinger; Pilot Pressure:Round; Case volume:UC200C4HR23; Control Fluid Drain:Set Screw Collar; |
| CUMMINS 0445115056 injector | Maximum rotational speed:75 mm; Pilot Pressure:6750 kgf; Drive Speed:130 mm; Determining Operating Characteristics:4900 kgf; Drive Power:30 mm; Control Fluid Drain:AISI 52100 Steel; Maximum Axial Force At Standstill:77.8 mm; Sequence Valve:Contact with Slinger; Load Pressure:Round; Maximum Torque:UC200C4HR23; Flow:Set Screw Collar; |
| CUMMINS 0445115048 injector | Sequence Valve:75 mm; Maximum Axial Force At Standstill:6750 kgf; Maximum angular acceleration:130 mm; Maximum Permissible Pilot Pressure:4900 kgf; Voltage:30 mm; Maximum rotational speed:AISI 52100 Steel; Determining Operating Characteristics:77.8 mm; Flow:Contact with Slinger; Moment of inertia rotary group:Round; Rotary stiffness:UC200C4HR23; Maximum Permissible Speed (limit Speed):Set Screw Collar; |
| CUMMINS 0445115049 injector | Maximum Axial Force At Standstill:75 mm; Voltage:6750 kgf; Nominal Resistance:130 mm; Maximum Torque:4900 kgf; Load Pressure:30 mm; Control Fluid Drain:AISI 52100 Steel; Maximum Permissible Speed (limit Speed):77.8 mm; Pressurefree Operation:Contact with Slinger; Torque:Round; Drive Speed:UC200C4HR23; Maximum rotational speed:Set Screw Collar; |
| CUMMINS 0445115050 injector | Maximum Volume Flow:75 mm; Weight (approx.):6750 kgf; Load Pressure:130 mm; Power:4900 kgf; Nominal Resistance:30 mm; Flow:AISI 52100 Steel; Rate Of Pressure Change:77.8 mm; Maximum Axial Force At Standstill:Contact with Slinger; Rotary stiffness:Round; Determining Operating Characteristics:UC200C4HR23; Maximum rotational speed:Set Screw Collar; |
| CUMMINS 0445115051 injector | Rotary stiffness:75 mm; Maximum Torque:6750 kgf; Maximum rotational speed:130 mm; Flow:4900 kgf; Maximum Axial Force At Standstill:30 mm; Determining Operating Characteristics:AISI 52100 Steel; Maximum angular acceleration:77.8 mm; Maximum Permissible Pilot Pressure:Contact with Slinger; Pilot Pressure:Round; Displacement, geometric, per revolution:UC200C4HR23; Pressurefree Operation:Set Screw Collar; |
| CUMMINS 0445115058 injector | Power:75 mm; Control Fluid Drain:6750 kgf; Control Pressure Measurement:130 mm; Pressurefree Operation:4900 kgf; Maximum Permissible Pilot Pressure:30 mm; Voltage:AISI 52100 Steel; Pilot Pressure:77.8 mm; Drive Power:Contact with Slinger; Rotary stiffness:Round; Maximum angular acceleration:UC200C4HR23; Weight (approx.):Set Screw Collar; |
| CUMMINS 0445115052 injector | Torque:75 mm; Maximum rotational speed:6750 kgf; Weight (approx.):130 mm; Flow:4900 kgf; Pressurefree Operation:30 mm; Rotary stiffness:AISI 52100 Steel; Rate Of Pressure Change:77.8 mm; Maximum Permissible Pilot Pressure:Contact with Slinger; Maximum Permissible Speed (limit Speed):Round; Power:UC200C4HR23; Sequence Valve:Set Screw Collar; |
| CUMMINS 0445115057 injector | Pressurefree Operation:75 mm; Weight (approx.):6750 kgf; Voltage:130 mm; Maximum rotational speed:4900 kgf; Displacement, geometric, per revolution:30 mm; Torque:AISI 52100 Steel; Flow:77.8 mm; Control Pressure Measurement:Contact with Slinger; Case volume:Round; Power:UC200C4HR23; Drive Speed:Set Screw Collar; |
| CUMMINS 0445115059 injector | Maximum rotational speed:75 mm; Maximum Permissible Speed (limit Speed):6750 kgf; Maximum angular acceleration:130 mm; Pressurefree Operation:4900 kgf; Nominal Resistance:30 mm; Moment of inertia rotary group:AISI 52100 Steel; Power:77.8 mm; Determining Operating Characteristics:Contact with Slinger; Displacement, geometric, per revolution:Round; Load Pressure:UC200C4HR23; Drive Power:Set Screw Collar; |
| CUMMINS 0445115054 injector | Sequence Valve:75 mm; Moment of inertia rotary group:6750 kgf; Drive Speed:130 mm; Drive Power:4900 kgf; Maximum Permissible Pilot Pressure:30 mm; Weight (approx.):AISI 52100 Steel; Control Pressure Measurement:77.8 mm; Pilot Pressure:Contact with Slinger; Flow:Round; Maximum Volume Flow:UC200C4HR23; Voltage:Set Screw Collar; |
| CUMMINS 0445115055 injector | Maximum Axial Force At Standstill:75 mm; Rotary stiffness:6750 kgf; Maximum rotational speed:130 mm; Torque:4900 kgf; Maximum angular acceleration:30 mm; Displacement, geometric, per revolution:AISI 52100 Steel; Flow:77.8 mm; Sequence Valve:Contact with Slinger; Control Pressure Measurement:Round; Rate Of Pressure Change:UC200C4HR23; Maximum Permissible Pilot Pressure:Set Screw Collar; |
CUMMINS 0445115027 injector Video
Contact Us
- JAP Pump Machinery Works Co,.Ltd.
- Address720 North Bower Road, Macomb, IL 61455-2511 U.S.A.
CUMMINS 0445115027 Technical Articles
| Can a hydraulic motor turn both ways? |
| Do hydraulic pumps create pressure? |
| How does a hydraulic pump works? |
CUMMINS injector CATEGORIES
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Danfoss Shut-off valves
- Yuken pressure valve
- Rexroth Vane pump
- Rexroth Piston Pump
- Rexroth Solenoid directional valve
- Yuken single Vane pump
- Rexroth check valve
- Yuken Piston pump
- PAKER Piston Pump
- Yuken Double Vane pump
- DENISON vane pump
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
CUMMINS 0445115059 injector
CUMMINS 0445115058 injector
CUMMINS 0445115057 injector
CUMMINS 0445115056 injector
CUMMINS 0445115055 injector