COMMON RAIL 0445110357 injector - JAP Pump Machinery Works Co,.Ltd.

✖

Home

Stock Categories

Technical Articles

Rexroth THROTTLE VALVE

Rexroth PRESSURE RELIEF VALVE

Danfoss Shut-off valves

Home>Products>COMMON RAIL injector>COMMON RAIL 0445110357 injector image

COMMON RAIL 0445110357 injector image

Back to product page

Technical informationCOMMON RAIL 0445110357 injector

Displacement, geometric, per revolution:75.8 mm
Power:75.8 mm
Maximum Torque:89.2 mm
Maximum Permissible Pilot Pressure:0.5 mm
Control Fluid Drain:4.9 mm
Maximum angular acceleration:1.1 mm
Control Pressure Measurement:0.6 mm
Moment of inertia rotary group:28.3 mm
Load Pressure:71 mm
Maximum Volume Flow:71 mm
Maximum Axial Force At Standstill:94 mm
Sequence Valve:96.8 mm
Case volume:1 mm
Determining Operating Characteristics:0.6 mm
Torque:78.1 mm
Voltage:39 kN
Rate Of Pressure Change:35.5 kN
Drive Power:1.5 kN
Maximum rotational speed:12000 r/min
Limiting speed for oil lubrication:19000 mm/min
Ball - Dw:11.112 mm
Ball - z:20
Gref:5.7 cm3
Calculation factor - e:0.68
Calculation factor - Y2:1.41
Calculation factor - Y0:0.76
Calculation factor - X2:0.67
Calculation factor - Y1:0.92
Preload class A - GA:240 N
Preload class B - GB:480 N
Preload class C - GC:960 N
Preload class D - GD:1920 N
Calculation factor - f:1.13
Calculation factor - f1:0.99
Calculation factor - f2A:1
Calculation factor - f2B:1.02
Calculation factor - f2C:1.05
Calculation factor - f2D:1.08
Calculation factor - fHC:1
Preload class A:174 N/micron
Preload class B:227 N/micron
Preload class C:302 N/micron
Preload class D:409 N/micron
d1:75.8 mm
d2:75.8 mm
D1:89.2 mm
C1:4.9 mm
r1,2 min.:1.1 mm
r3,4 min.:0.6 mm
da min.:71 mm
db min.:71 mm
Da max.:94 mm
Db max.:96.8 mm
ra max.:1 mm
rb max.:0.6 mm
dn:78.1 mm
Basic dynamic load rating C:39 kN
Basic static load rating C0:35.5 kN
Fatigue load limit Pu:1.5 kN
Attainable speed for grease lubrication:12000 r/min
Attainable speed for oil-air lubrication:19000 r/min
Ball diameter Dw:11.112 mm
Number of balls z:20
Reference grease quantity Gref:5.7 cm³
Preload class A GA:240 N
Static axial stiffness, preload class A:174 N/µm
Preload class B GB:480 N
Static axial stiffness, preload class B:227 N/µm
Preload class C GC:960 N
Static axial stiffness, preload class C:302 N/µm
Preload class D GD:1920 N
Static axial stiffness, preload class D:409 N/µm
Calculation factor f:1.13
Calculation factor f1:0.99
Calculation factor f2A:1
Calculation factor f2B:1.02
Calculation factor f2C:1.05
Calculation factor f2D:1.08
Calculation factor fHC:1
Calculation factor e:0.68
Calculation factor (single, tandem) Y2:0.87
Calculation factor (single, tandem) Y0:0.38
Calculation factor (single, tandem) X2:0.41
Calculation factor (back-to-back, face-to-face) Y1:0.92
Calculation factor (back-to-back, face-to-face) Y2:1.41
Calculation factor (back-to-back, face-to-face) Y0:0.76
Calculation factor (back-to-back, face-to-face) X2:0.67
Mass bearing:0.43 kg

Contact Us

JAP Pump Machinery Works Co,.Ltd.: Address720 North Bower Road, Macomb, IL 61455-2511 U.S.A.

Send Now