Home>Products>Yuken Double Vane pump>Yuken PV2R12-12-59-F-RAA-40 Double Vane pump
Yuken PV2R12-12-59-F-RAA-40 Double Vane pump
category
Yuken Double Vane pump
Yuken PV2R12-12-59-F-RAA-40 SPECIFICATIONS
YOU’LL FIND AN EXTENSIVE 28 Diâmetro externo (mm) SELECTION OF Yuken PV2R12-12-59-F-RAA-40 Double Vane pump FOR SALE.
- Yuken
PV2R12-12-59-F-RAA-40
- Mounted Bearing
- 22226
- 4-7/16 in
- Imperial
- 99999B
- Tapered Adapter
- 108.0 lb
- Four-Bolt Square Flange
-
JAP Pump Machinery Works Co,.Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Compare similar productsYuken PV2R12-12-59-F-RAA-40 Double Vane pump
- 0883450382083
- 12.88 in
- 5.71 in
- 11.190 in
- 7.000 in
- 16.5 in
- 1.50 in
- 1.125 in
- 10.375 in
- 4.7 in
- 4.62 in
- 2.48 in
- 5.320 in
- 0.49 in
- 4.13 in
- 212000 lb
- 170000 lb
- 0.28
- 2.43
- 3.61
- 700 rpm
- 1500 rpm
- 400 rpm
- 700 rpm
- 1000 rpm
- 400 rpm
- 0.083 in
- 0.0040 in
- 0.0063 in
- 0.0079 in
- 0.0025 in
- 0.0035 in
- 0.035 in
Yuken PV2R12-12-59-F-RAA-40 Sponsored products related to this itemYuken PV2R12-12-59-F-RAA-40 Double Vane pump
Yuken PV2R12-12-59-F-RAA-40 Double Vane pump#Parts Table 1# | ||||||||
---|---|---|---|---|---|---|---|---|
Ball Joint | 6,35 mm | 3,175 | 218.000 mm | 31171547 | ||||
Bearings | 13 | 10 | 0,0023 Kg | 0.28 | ||||
Oil Distribution Disc Plug | B04264 | 25 mm | 0.65 kg | C0-Medium | ||||
Inclined Plate | 5.188 Inch | 131.775 Millimeter | 3.688 Inch | 93.675 Millimeter | 26.786 | N/A | ||||
Set Plate | 3.37 Inch | 85.598 Millimeter | 2.5 Inch | 63.5 Millimeter | 5.448 | N/A | ||||
Separator | 120 N/mm² | Open | 3.447 | N/A | ||||
Cylinder | 7.874 Inch | 200 Millimeter | 95 | 6.73 | N/A | ||||
Rotor | 3 mm | 18.117 | 9 | N/A | ||||
Guide Ball | 22 mm | 14 mm | 1 g / Weight | 80 | ||||
Friction Plate | 680.000 mm | 460.000 mm | 0,003 lbs / Weight | 22 mm | ||||
Press Pin | 80 mm | 0.2 mm | Standard Capacity | 2 Rib Inner Ring | Plain Outer Ring | Medium Series | Cage on Inner Ring OD | 4 Bolt Square Flange Block | ||||
Push Rod | 280 mm | 130 mm | 3.447 | -40 to 176 °F | ||||
The Ball Hinge Spring | 20 mm | 18 mm | 3600 | Single Row |
Yuken PV2R34-76-237-F-RAAA-31 Double Vane pump | Maximum angular acceleration:Mounted Bearing; Rate Of Pressure Change:22226; Maximum Permissible Pilot Pressure:4-7/16 in; Determining Operating Characteristics:Imperial; Case volume:99999B; Maximum Torque:Tapered Adapter; Torque:108.0 lb; Flow:Four-Bolt Square Flange; Maximum Volume Flow:0883450382083; Displacement, geometric, per revolution:12.88 in; Control Fluid Drain:5.71 in; Maximum rotational speed:11.190 in; Nominal Resistance:7.000 in; Load Pressure:16.5 in; Voltage:1.50 in; Pressurefree Operation:1.125 in; Pilot Pressure:10.375 in; Drive Power:4.7 in; Maximum Axial Force At Standstill:4.62 in; Power:2.48 in; Maximum Permissible Speed (limit Speed):5.320 in; Drive Speed:0.49 in; Moment of inertia rotary group:4.13 in; Control Pressure Measurement:212000 lb; Rotary stiffness:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-94-136-F-RAAA-31 Double Vane pump | Pressurefree Operation:Mounted Bearing; Maximum rotational speed:22226; Flow:4-7/16 in; Voltage:Imperial; Load Pressure:99999B; Maximum Permissible Pilot Pressure:Tapered Adapter; Control Fluid Drain:108.0 lb; Maximum Axial Force At Standstill:Four-Bolt Square Flange; Maximum Volume Flow:0883450382083; Case volume:12.88 in; Rate Of Pressure Change:5.71 in; Determining Operating Characteristics:11.190 in; Maximum angular acceleration:7.000 in; Displacement, geometric, per revolution:16.5 in; Control Pressure Measurement:1.50 in; Sequence Valve:1.125 in; Drive Speed:10.375 in; Moment of inertia rotary group:4.7 in; Pilot Pressure:4.62 in; Weight (approx.):2.48 in; Power:5.320 in; Maximum Permissible Speed (limit Speed):0.49 in; Drive Power:4.13 in; Nominal Resistance:212000 lb; Torque:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-94-237-F-RAAA-31 Double Vane pump | Rotary stiffness:Mounted Bearing; Determining Operating Characteristics:22226; Drive Speed:4-7/16 in; Moment of inertia rotary group:Imperial; Weight (approx.):99999B; Flow:Tapered Adapter; Maximum Axial Force At Standstill:108.0 lb; Nominal Resistance:Four-Bolt Square Flange; Sequence Valve:0883450382083; Displacement, geometric, per revolution:12.88 in; Drive Power:5.71 in; Pilot Pressure:11.190 in; Maximum Permissible Pilot Pressure:7.000 in; Maximum rotational speed:16.5 in; Control Pressure Measurement:1.50 in; Load Pressure:1.125 in; Power:10.375 in; Control Fluid Drain:4.7 in; Torque:4.62 in; Case volume:2.48 in; Pressurefree Operation:5.320 in; Voltage:0.49 in; Maximum Volume Flow:4.13 in; Maximum Permissible Speed (limit Speed):212000 lb; Maximum angular acceleration:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-85-153-F-RAAA-31 Double Vane pump | Displacement, geometric, per revolution:Mounted Bearing; Torque:22226; Drive Power:4-7/16 in; Control Pressure Measurement:Imperial; Nominal Resistance:99999B; Maximum Axial Force At Standstill:Tapered Adapter; Control Fluid Drain:108.0 lb; Moment of inertia rotary group:Four-Bolt Square Flange; Drive Speed:0883450382083; Maximum angular acceleration:12.88 in; Maximum Volume Flow:5.71 in; Determining Operating Characteristics:11.190 in; Case volume:7.000 in; Rate Of Pressure Change:16.5 in; Maximum Permissible Pilot Pressure:1.50 in; Load Pressure:1.125 in; Flow:10.375 in; Weight (approx.):4.7 in; Maximum Permissible Speed (limit Speed):4.62 in; Pilot Pressure:2.48 in; Maximum Torque:5.320 in; Pressurefree Operation:0.49 in; Sequence Valve:4.13 in; Rotary stiffness:212000 lb; Power:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-85-136-F-RAAA-31 Double Vane pump | Pressurefree Operation:Mounted Bearing; Maximum rotational speed:22226; Control Pressure Measurement:4-7/16 in; Moment of inertia rotary group:Imperial; Maximum Permissible Pilot Pressure:99999B; Sequence Valve:Tapered Adapter; Control Fluid Drain:108.0 lb; Maximum Axial Force At Standstill:Four-Bolt Square Flange; Maximum Permissible Speed (limit Speed):0883450382083; Displacement, geometric, per revolution:12.88 in; Pilot Pressure:5.71 in; Nominal Resistance:11.190 in; Voltage:7.000 in; Torque:16.5 in; Rate Of Pressure Change:1.50 in; Determining Operating Characteristics:1.125 in; Case volume:10.375 in; Load Pressure:4.7 in; Maximum Volume Flow:4.62 in; Drive Power:2.48 in; Flow:5.320 in; Maximum Torque:0.49 in; Weight (approx.):4.13 in; Power:212000 lb; Rotary stiffness:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-94-153-F-RAAA-31 Double Vane pump | Moment of inertia rotary group:Mounted Bearing; Power:22226; Drive Power:4-7/16 in; Maximum Permissible Speed (limit Speed):Imperial; Flow:99999B; Drive Speed:Tapered Adapter; Rotary stiffness:108.0 lb; Maximum Torque:Four-Bolt Square Flange; Control Fluid Drain:0883450382083; Maximum angular acceleration:12.88 in; Torque:5.71 in; Displacement, geometric, per revolution:11.190 in; Pilot Pressure:7.000 in; Rate Of Pressure Change:16.5 in; Voltage:1.50 in; Maximum Permissible Pilot Pressure:1.125 in; Maximum Axial Force At Standstill:10.375 in; Determining Operating Characteristics:4.7 in; Weight (approx.):4.62 in; Sequence Valve:2.48 in; Pressurefree Operation:5.320 in; Case volume:0.49 in; Maximum rotational speed:4.13 in; Control Pressure Measurement:212000 lb; Maximum Volume Flow:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-85-184-F-RAAA-31 Double Vane pump | Rate Of Pressure Change:Mounted Bearing; Determining Operating Characteristics:22226; Nominal Resistance:4-7/16 in; Maximum Torque:Imperial; Drive Speed:99999B; Drive Power:Tapered Adapter; Maximum Permissible Pilot Pressure:108.0 lb; Sequence Valve:Four-Bolt Square Flange; Maximum Volume Flow:0883450382083; Control Fluid Drain:12.88 in; Load Pressure:5.71 in; Maximum Axial Force At Standstill:11.190 in; Pilot Pressure:7.000 in; Maximum angular acceleration:16.5 in; Rotary stiffness:1.50 in; Case volume:1.125 in; Torque:10.375 in; Control Pressure Measurement:4.7 in; Maximum Permissible Speed (limit Speed):4.62 in; Displacement, geometric, per revolution:2.48 in; Power:5.320 in; Moment of inertia rotary group:0.49 in; Pressurefree Operation:4.13 in; Weight (approx.):212000 lb; Flow:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-85-200-F-RAAA-31 Double Vane pump | Flow:Mounted Bearing; Pressurefree Operation:22226; Rotary stiffness:4-7/16 in; Maximum Permissible Pilot Pressure:Imperial; Control Pressure Measurement:99999B; Drive Power:Tapered Adapter; Power:108.0 lb; Maximum Permissible Speed (limit Speed):Four-Bolt Square Flange; Torque:0883450382083; Moment of inertia rotary group:12.88 in; Voltage:5.71 in; Maximum rotational speed:11.190 in; Maximum Volume Flow:7.000 in; Displacement, geometric, per revolution:16.5 in; Determining Operating Characteristics:1.50 in; Control Fluid Drain:1.125 in; Pilot Pressure:10.375 in; Load Pressure:4.7 in; Weight (approx.):4.62 in; Nominal Resistance:2.48 in; Case volume:5.320 in; Maximum Torque:0.49 in; Maximum Axial Force At Standstill:4.13 in; Sequence Valve:212000 lb; Rate Of Pressure Change:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-85-237-F-RAAA-31 Double Vane pump | Rotary stiffness:Mounted Bearing; Sequence Valve:22226; Torque:4-7/16 in; Flow:Imperial; Maximum Permissible Speed (limit Speed):99999B; Nominal Resistance:Tapered Adapter; Pilot Pressure:108.0 lb; Maximum Axial Force At Standstill:Four-Bolt Square Flange; Displacement, geometric, per revolution:0883450382083; Maximum Torque:12.88 in; Moment of inertia rotary group:5.71 in; Weight (approx.):11.190 in; Control Pressure Measurement:7.000 in; Maximum Volume Flow:16.5 in; Case volume:1.50 in; Maximum rotational speed:1.125 in; Load Pressure:10.375 in; Power:4.7 in; Maximum angular acceleration:4.62 in; Drive Power:2.48 in; Drive Speed:5.320 in; Rate Of Pressure Change:0.49 in; Voltage:4.13 in; Pressurefree Operation:212000 lb; Control Fluid Drain:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-94-184F-RAAA-31 Double Vane pump | Maximum Volume Flow:Mounted Bearing; Load Pressure:22226; Voltage:4-7/16 in; Flow:Imperial; Determining Operating Characteristics:99999B; Maximum rotational speed:Tapered Adapter; Torque:108.0 lb; Control Fluid Drain:Four-Bolt Square Flange; Displacement, geometric, per revolution:0883450382083; Pilot Pressure:12.88 in; Nominal Resistance:5.71 in; Drive Speed:11.190 in; Control Pressure Measurement:7.000 in; Moment of inertia rotary group:16.5 in; Rate Of Pressure Change:1.50 in; Maximum angular acceleration:1.125 in; Maximum Permissible Pilot Pressure:10.375 in; Pressurefree Operation:4.7 in; Weight (approx.):4.62 in; Maximum Torque:2.48 in; Case volume:5.320 in; Maximum Axial Force At Standstill:0.49 in; Drive Power:4.13 in; Power:212000 lb; Sequence Valve:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-94-200-F-RAAA-31 Double Vane pump | Maximum rotational speed:Mounted Bearing; Rate Of Pressure Change:22226; Load Pressure:4-7/16 in; Determining Operating Characteristics:Imperial; Torque:99999B; Weight (approx.):Tapered Adapter; Control Pressure Measurement:108.0 lb; Maximum Permissible Speed (limit Speed):Four-Bolt Square Flange; Displacement, geometric, per revolution:0883450382083; Flow:12.88 in; Moment of inertia rotary group:5.71 in; Pressurefree Operation:11.190 in; Pilot Pressure:7.000 in; Power:16.5 in; Maximum Volume Flow:1.50 in; Voltage:1.125 in; Drive Power:10.375 in; Nominal Resistance:4.7 in; Maximum Torque:4.62 in; Rotary stiffness:2.48 in; Drive Speed:5.320 in; Sequence Valve:0.49 in; Maximum Permissible Pilot Pressure:4.13 in; Maximum angular acceleration:212000 lb; Case volume:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
Yuken PV2R34-76-200-F-RAAA-31 Double Vane pump | Control Fluid Drain:Mounted Bearing; Maximum Axial Force At Standstill:22226; Load Pressure:4-7/16 in; Rate Of Pressure Change:Imperial; Drive Power:99999B; Weight (approx.):Tapered Adapter; Flow:108.0 lb; Determining Operating Characteristics:Four-Bolt Square Flange; Drive Speed:0883450382083; Voltage:12.88 in; Power:5.71 in; Torque:11.190 in; Moment of inertia rotary group:7.000 in; Maximum Permissible Pilot Pressure:16.5 in; Maximum Volume Flow:1.50 in; Control Pressure Measurement:1.125 in; Maximum angular acceleration:10.375 in; Maximum Torque:4.7 in; Case volume:4.62 in; Sequence Valve:2.48 in; Pressurefree Operation:5.320 in; Nominal Resistance:0.49 in; Rotary stiffness:4.13 in; Maximum rotational speed:212000 lb; Pilot Pressure:170000 lb; e - Geometry Factor:0.28; Y1 - Geometry Factor:2.43; Y2 - Geometry Factor:3.61; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - T Seal:1500 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Grease Lubrication - B/C/O Seal:400 rpm; Float:0.083 in; Shaft Tolerance:0.0040 in; Pre Install Clearance Min:0.0063 in; Pre Install Clearance Max:0.0079 in; Int Radial Clearance Reduction Min:0.0025 in; Int Radial Clearance Reduction Max:0.0035 in; Adapter Sleeve Axial Movement Min:0.035 in; |
vane pumps - YUKEN Hydraulic Equipment
(.59). 80. (3.15). 145.5(5.73). 56 (2.20). Flange Mtg.: PV2R1-*-F-RAA-42/4290 ... 40. 60. 80. 100. 120. 140. 160. Allowable. Range. Allowable. Range. PV2R12
Yuken PV2R12-12-59-F-RAA-40 Double Vane ... - Bearing Services
Buy Yuken PV2R12-12-59-F-RAA-40 Double Vane Pump services Yuken hydraulic pumps from Horton Bearing Services,Indonesia bearings supply Distributor
Yuken vane pumps - PV2R series single and double vane
Information on the Yuken line of hydraulic vane pumps including PV2R, PV2R4A, PV2R24A, ... PV2R1-12-F-RAA-4190; PV2R1-12-F-RAB-41; PV2R1-12-L-RAA-41; PV2R1-12-L-RAA- ... PV2R12-25-59-F-REAA-43; PV2R12-25-59-L-LELL-40
Yuken PV2R Series Double Vane Pumps PV2R12-19-33-F-RAA-40
Yuken PV2R Series Double Vane Pumps PV2R12-19-33-F-RAA-40 ... PV2R12-10-59-F-RAA-40, PV2R14-17-184-F-RAAA-31. PV2R12-10-59-L-RAA-40
Yuken PV2R12-12-59-F-RAA-40 Double Vane Pump for sale
Brand Name : Yuken. Model Number : Yuken Double Vane Pump PV2R12-12-59-F-RAA-40. Place of Origin : Japan. MOQ : 1. Payment Terms : T/T, Western
PV2R - YUKEN Hydraulic Equipment
PV2R23. PV2R33. 6, 8. 10, 12. 14, 17. 19, 23. 25, 31. 26, 33. 41, 47. 53, 59. 65. 3 ... 2) As for PV2R12 and PV2R33 series, the sum of the input powers to small ... (3.82). Sq. 40(1.57). 106.4. (4.189). 17.5. (.689). "C" Thd. "F" Deep. 4 Places
Yuken PV2R12-12-59-F-RAA-40 Double Vane Pump
Quality Yuken manufacturers & exporter - buy Yuken PV2R12-12-59-F-RAA-40 Double Vane Pump from China manufacturer
YUKEN PV2R12-10-26-F-RAA-40 Pump - Hydraulic Pump
PV2R12-25-59-L-LELL-40; PV2R12-25-65-F-REAA-4390. Yuken PV2R Series Double Vane Pumps PV2R12-8-59-L. PV2R12-10-26-F-RAA-40, PV2R14-12
Yuken PV2R12-12-59-F-RAA-40 Double Vane pump Video
Contact Us

- JAP Pump Machinery Works Co,.Ltd.
- Address720 North Bower Road, Macomb, IL 61455-2511 U.S.A.
Yuken PV2R12-12-59-F-RAA-40 Technical Articles
Can a hydraulic motor turn both ways? |
Do hydraulic pumps create pressure? |
How does a hydraulic pump works? |
Yuken Double Vane pump CATEGORIES
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Danfoss Shut-off valves
- Yuken pressure valve
- Rexroth Vane pump
- Rexroth Piston Pump
- Rexroth Solenoid directional valve
- Yuken single Vane pump
- Rexroth check valve
- Yuken Piston pump
- PAKER Piston Pump
- Yuken Double Vane pump
- DENISON vane pump
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector